Web Pages - D-Link DES-1228/ME User Manual

Web Pages

When you connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a user name
and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Administration – Contains windows concerning configuring the basic functions of the Switch, including Device Information, IP
Address, Port Configuration, DHCP/BOOTP Relay, User Accounts, Cable Diagnostics, Port Mirroring, System Log Settings, Log
Settings, SNTP Settings, MAC Notification Settings, TFTP Services, Multiple Image Services, Ping Test, Safeguard Engine,
SNMP Manager, Forwarding & Filtering, and SMTP Service.
Layer 2 Features – Contains windows concerning Layer 2 features of the Switch, including VLAN, Trunking, IGMP Snooping,
Spanning Tree, Loopback Detection and LLDP.
CoS – Contains windows concerning Port Bandwidth, 802.1P Default Priority, 802.1P User Priority, CoS Scheduling Mechanism,
CoS Output Scheduling, Priority Settings, TOS Priority Settings, DSCP Priority Settings, Port Mapping Priority Settings, and
MAC Priority.
ACL – Contains the windows for Access Profile Table and CPU Interface Filtering.
Security – Contains windows for Traffic Control, Port Security, Port Lock Entries, IP-MAC-Port Binging, SSH, 802.1X, Trusted
Host, Access Authentication Control and Traffic Segmentation.
Monitoring – Contains windows for including CPU Utilization, Port Utilization, Packets, Packet Errors, Packet Size, MAC
Address, Switch Log, IGMP Snooping Group, Browse Router Port, VLAN Status, Static ARP Settings, ARP-FDB, Gratuitous
ARP Settings, Session Table, and Port Access Control.
Switch Maintenance – Contains information regarding Reset, Reboot System, Save Changes, and Logout.
NOTE: Be sure to configure the user name and password in the User Accounts window before
connecting the Switch to the greater network.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
21