D-Link DES-1228/ME User Manual page 194

DES-1228/ME Layer 2 Fast Ethernet Managed Switch
methods to this method list:
•
local_enable - Adding this parameter will require the user to be authenticated
using the local enable password database on the Switch. The user in the next
section entitled Local Enable Password must set the local enable password.
•
none - Adding this parameter will require an authentication to access the Switch.
•
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
•
tacacs - Adding this parameter will require the user to be authenticated using
the TACACS protocol from a remote TACACS server.
•
xtacacs - Adding this parameter will require the user to be authenticated using
the XTACACS protocol from a remote XTACACS server.
•
tacacs+ - Adding this parameter will require the user to be authenticated using
the TACACS protocol from a remote TACACS server.
•
server_group - Adding a previously configured server group will require the user
to be authenticated using a user-defined server group previously configured on
the Switch.
181