D-Link DES-1228/ME User Manual page 183

This window displays the following information:
Parameter
RADIUS Timeout (1-
255 Sec)
Radius Retransmit
(1-255)
Succession
RADIUS Server
Authentic Port
Accounting Port
Key
Confirm Key
Status
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 10-26. RADIUS Server window
Description
This field is used to set the time the Switch will wait for a response from the Radius Server. The
user may set a time between 0 and 255 seconds. The default setting is 5 seconds.
Enter the value in the Radius Retransmit field to change how many times the device will resend
an authentication request when the Radius server timeout occurs. The default setting is 2
seconds.
Choose the desired RADIUS server to configure: First, Second or Third.
Set the RADIUS server IP.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Set the RADIUS account server(s) UDP port. The default port is 1813.
Set the key the same as that of the RADIUS server.
Confirm the shared key is the same as that of the RADIUS server.
This allows users to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
170