Introduction; Features - D-Link DES-1228/ME User Manual

Introduction

DES-1228/ME Switch Description

Features

Ports
LED Indicators
Front-Panel Description
Rear Panel Description
Side Panel Description
Installing SFP ports
DES-1228/ME
The DES-1228/ME is a member of the D-Link Switch family. This Switch provides unsurpassed performance, fault tolerance,
scalable flexibility, robust security, standard-based interoperability and impressive technology to future-proof departmental and
enterprise network deployments with an easy migration path.
The following manual describes the installation, maintenance, and configurations concerning the DES-1228/ME.
Features
•
IEEE 802.3ad Link Aggregation Control Protocol support
•
IEEE 802.1X Port-based and Host-based Access Control
•
IEEE 802.1Q VLAN
•
IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree and IEEE 802.1s Multiple Spanning Tree support
•
Access Control List (ACL) support
•
Access Authentication Control utilizing TACACS, XTACACS and TACACS+
•
Internal Flash Drive for saving configurations and firmware
•
Simple Network Time Protocol support
•
MAC Notification support
•
System and Port Utilization support
•
System Log Support
•
Support port-based enable and disable
•
Address table: Supports up to 8K MAC addresses per device
•
Supports a packet buffer of up to 512K bytes
•
Supports Port-based VLAN Groups
•
Port Trunking with flexible load distribution and fail-over function
•
IGMP Snooping support
•
SNMP support
•
Secure Shell (SSH) support
•
Port Mirroring support
•
MIB support for:
1. RFC1213 MIB II
2. RFC1493 Bridge
3. RFC2819 RMON
4. RFC2665 Ether-like MIB
5. RFC2863 Interface MIB
6. Private MIB
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Section 1
1