Placing Conference Calls; Adding A Conference Party; Transferring A Conference; Dropping Out Of A Conference - Mitel 5360 User Manual

Call Features

Placing Conference Calls

You can place a conference call with up to three internal or external parties (for a total of four
parties, including yourself).
To place a conference call:

Adding a Conference Party

You can add a conference party during the conference.
To add a conference party:

Transferring a Conference

You can transfer an existing conference to another extension.
To transfer a conference:

Dropping Out of a Conference

You can drop out of a conference and return to the conference later.
To drop out of a conference:
To return to the conference:
Page 46
1. While on the first call, press the Conference button to place the call on hold.
CALL NEXT PARTY TO CNF appears.
2. Place a call to the next conference party (for external calls, press the Outgoing button
or the Outgoing Call access code [8 is the default code], and then dial the number).
3. After the party answers, announce the conference, and then press the
Conference button to place the call on hold. If necessary, repeat this step to add
the remaining conference party.
4. Press the Conference button again or the CONNECT TO CNF menu button to start
the conference. CNF IN PROGRESS appears.
1. Press the Conference button or the ADD PARTY menu button. This leaves the
conference parties connected.
2. Place a call to the party to be added to the conference, and then announce the
conference. Press the Conference button (twice) or the CONNECT TO CNF menu
button to add the party and rejoin the conference.
1. During the conference, press
2. Announce the conference (if desired), and then hang up. CONFERENCE TFR from
<name> appears on the called party's display. The party must then press the flashing
Conference button to connect to the conference.
Press the Conference button or
NUMBER appears. This removes you from the conference but leaves the other parties
connected.
Press the flashing Call Key button. CONFERENCE WAS HOLDING appears, and you
are reconnected to the conference.
(Transfer), and then dial the extension number.
(Hold), and then hang up. ENTER EXTENSION
Mitel ® 5360 IP Phone User Guide – Issue 1, June 2010