Using Remote Programming; Changing The Dynamic Extension Express Settings - Mitel 5360 User Manual

Call Features

Using Remote Programming

If the Configuration Assistant feature is enabled for your system, Mitel recommends that you
use Configuration Assistant instead of the Remote Programming feature described in this
section. Configuration Assistant offers an enhanced, voice guided configuration portal that
provides easy-to-use, remote access to the Call Forwarding, Dynamic Extension Express, and
DND features. See
To use Remote Programming to access these features from another system phone or an
external phone, follow the instructions in this section.

Changing the Dynamic Extension Express Settings

See "Using Dynamic Extension Express" on
Extension Express.
To enable Dynamic Extension Express using Remote Programming:
To disable Dynamic Extension Express using Remote Programming:
3.
Page 54
page 51
A Direct Inward System Access (DISA) number is required to use Remote
NOTE Programming from an external phone. Contact your system administrator for more
information.
1. Do one of the following:
• Call your DISA number (provided by the system administrator). If necessary, enter
your DISA password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
Station password for your extension.
5. Dial 363 (Dynamic Extension Express On).
Follow steps 1 - 4 above, dial 362 (Dynamic Extension Express Off), and then hang up.
This feature may or may not be enabled for your system.
for using Configuration Assistant.
page 44
Mitel ®
3
for more information about Dynamic
page 51 for details on setting up a
5360 IP Phone User Guide – Issue 1, June 2010