Placing External Calls; Redialing A Number - Mitel 5360 User Manual

Placing External Calls

The following sections describe features used when placing external calls.
To place an external call:
Depending on system configuration, you may also be able to use one of the following methods
to select an outgoing line:
•
•
Contact your system administrator for more information about using Select Line Group or ARS
access codes.

Redialing a Number

You can quickly redial the last external number dialed. You cannot redial extension numbers.
To use Redial:
Mitel ® 5360 IP Phone User Guide – Issue 1, June 2010
1. Press the Outgoing button, an unlit Call Key button, or enter the Outgoing Call
access code (8 is the default code).
2. Dial the number.
If you cannot place an external call because all outgoing lines are busy, you
can request a callback, which prompts the system to contact you when a
line becomes available. See "Requesting a Callback (Queuing the Phone)"
on page
NOTES
If you are prompted for an account code (indicated by a single beep), you
must enter an account code before you can place your call. See "Using
Account Codes" on
Enter the Select Line Group feature code. The default codes are 92001 to 92208.
Enter the Automatic Route Selection (ARS) feature code. The default code is 92000.
With or without the handset lifted, press
a line and dials the number.
32."
page 38.
(Redial). The system automatically selects
Answering and Placing Calls
Page 33