Waste Ink Pad Removal - Epson Stylus CX3100 Service Manual

EPSON Stylus CX3100/3200
Do not touch the LD Pad or Hopper Pad of the ASF Unit.
C A U T I O N
Do not reuse any scratched pad.
Figure 4-25. Hopper Pad and LD Pad
When installing the ASF Unit, the flat surface of the LD Roller
C H E C K
must face the inside of the Mechanism Unit.
P O I N T
Figure 4-26. LD Roller Installation
Disassembly and Assembly
Hopper Pad
LD Pad

4.4.4 Waste Ink Pad Removal

1. Remove the Middle Housing. (See
2. Remove the ASF Unit. (See
3. Remove the Tube Holder.
4. Remove the Tube Holder Waste Ink Pad.
Figure 4-28. Removing the Tube Holder Waste Ink Pad
Disassembly of Printer
"Middle Housing Removal" on page
"ASF Unit Removal" on page
Figure 4-27. Removing the Tube Holder
Revision A
44.)
48)
49