Figure 13. Configuration Menu Commands - Redundancy Off - Comtech EF Data UT-4505 Installation And Operation Manual

UT4500 Series Up Converter
System Operation
---------SELECT---------
----CONFIGURATION-MENU--

Figure 13. Configuration Menu Commands - Redundancy OFF.

ENTER
FREQ= 14XXX.XXX-MHz-----
ATTN=-10.00-DB---Tx=OFF-
----EXTERNAL-5-MHz------
--REFERENCE-PRESENT-----
--ENTRY-MODE-=-REMOTE---
-COLD-START-=-DISABLED--
FAULT RECOVERY:-MANUAL--
------------------------
REDUNDANCY-CONFIG?-OFF--
------------------------
* Displayed only when there is
a 5/10 MHz reference input.
LEGEND
DISPLAY
---------SELECT---------
--MONITOR-STATUS-MENU---
29
MN/UT4500.IOM
Revision 2
KEY-PAD
ENT
CLR