The Wind-in-Place Bobbin System
regular sewing mode only, as it winds the bobbin from
the top spool directly to the bobbin. The Endless
Bobbin
feature is for Embroidery Sewing.
™
1.
Remove the bobbin cover.
2.
Load an empty special bobbin and replace the cover.
3.
Place the Standard "A" foot on the machine.
4.
Thread the machine for regular sewing.
5.
Press the "bobbin" key.
6.
Select the amount of thread to be wound
on the bobbin.
7.
Move the drop feed lever to the right to lower the feed dogs.
Quantum
Wind-in-Place Bobbin System
feature is for
™
Align mark on
handwheel with
mark on machine.
- 10 -
XL-6000
®
™
Be sure to use the
special bobbin
shown. The machine
cannot perform the
automatic bobbin
winding without this
special bobbin.