Singer Quantum XL-6000 Workbook page 47

10. Touch
11. Touch
1. Select Border #3 again.
2. Touch Pictogram (border appears in center of screen).
3. Touch
4. Touch
5. Touch 100 degrees, then touch 10 degrees a total of 8 times, until the
angle of rotation displayed reads 180 degrees.
6. Touch to register this change.
7. Touch
8. Use the arrow pictograms to position the border to line up vertically with
the upper border and meeting at the X-axis.
9. To check placement, touch
10. Touch spot on screen where the borders meet, to check the placement.
11. Touch
adjustments to the border placement.
12. Touch
13. Touch
14. Touch
to return to the Edit screen.
to combine with another border.
Pictogram.
Rotate Pictogram.
Pictogram to access Positioning Arrows and move border.
Pictogram to activate Positioning Arrows. Make the final
and Zoom to return to full screen.
to return to the Edit screen.
to select Multi-hoop End.
- 44 -
Quantum
Multiple Hoop Embroidery
Pictogram. Touch
XL-6000
®
8
x
zoom.