Machine Thread Exchanger - Singer Quantum XL-6000 Workbook

Auto Thread Exchanger
The Auto Thread Exchanger
Singer Exclusive Feature that
®
may be used semi-automatically
on the Sewing Machine side and
fully automatically
Embroidery Side of the Quantum
XL-6000. The
Exchanger is a true time saving
™
feature and is easy to use once
the procedure for threading and
operation is learned.
time to learn
operation.
1. Install Auto Thread Exchanger
Project
Installation of the Auto Thread Exchanger
angle with the lever pressed; slide the projections into the grooves on the back of the machine.
2. Install Thread Spools and Caps....
is a
™
on the
®
Auto Thread
Use this
the correct
....
™
e
Groov
ion
™
is self-evident. Holding the exchanger at a slight
- 13 -
Quantum
™
in Regular Sewing Mode
Proper installation of the thread
spools and spool caps is vital to
the Auto Thread Exchanger
operation. Refer to the drawings
at the left for proper direction
to lead the thread from the
spool and proper thread spools
to use with the selected thread.
Please note that when using the
small
sometimes the final 10% of the
thread
smoothly. In this case, use the
Auxiliary Spool Pin to use up
the remaining thread.
XL-6000
®
cross-wound spools
will not reel off
™