Singer Quantum XL-6000 Workbook page 40

•
Touch
•
Lower the Embroidery foot and resume sewing.
PREPARING TO SEW THE COMBINATION DESIGN
1. Place the fabric in the embroidery hoop, and then place the hoop onto the
embroidery unit.
2. Touch the
sew.
3. To view the entire design layout, touch the
4. To review the order of the color changes, touch the
5. Thread the left spool pin of the Auto Thread Exchanger
[light yellow], making sure the spool turns in a "clockwise" direction.
Touch the
6. "Stage" the right spool pin of the Auto Thread Exchanger
[gold].
7. Touch the
8. After color #1 is finished, the Auto Thread Exchanger
#1, automatically thread color #2 and begin to sew.
9. While color #2 is sewing, remove color #1 and replace it with color #3
[green]. Stage the green thread.
10. Touch the
11. After color #2 is finished, the Auto Thread Exchanger
#2, automatically thread color #3 and begin to sew.
Note: Continue changing thread colors for each segment of the design and
touching the Spool Direction Pictograms until the pattern is completed.
, to return to the previous screen.
Pictogram, to finish combining designs and prepare to
Key for Automatic Threading of the needle.
Pictogram, to engage the Auto Thread Exchanger
Pictogram, to engage the Auto Thread Exchanger
- 37 -
Quantum
Combination Embroidery
™
™
XL-6000
®
Pictogram.
Pictogram.
with color #1
™
with color #2
™
.
™
will rewind color
.
™
will rewind color