Configure Ip Address - Planet SGSW-24040 User Manual

Configure IP address

The SGSW Managed Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow:

Show the current IP address
1. On "Switch/> " prompt, enter "ip configuration".
2. The screen displays the current IP address, Subnet Mask and Gateway. As show in

Configure IP address
3. On "Switch/> " prompt, enter the following command and press <Enter>. As show in
Switch/> ip setup 192.168.0.101 255.255.255.0 192.168.0.253 1
The previous command would apply the follow settings for the Switch.
Figure 5-2 Show IP information screen
318
User's Manual of SGSW-24040 / 24240 Series
Figure
Figure
5-2.
5-3.