Planet SGSW-24040 User Manual page 318

The page includes the following fields:
Object
 PoE Mode
 Schedule
 AF / AT Mode
 Priority
 Maximum Power
 Power Allocation
Description
There are three modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
Schedule: enable PoE function in schedule mode.
Indicates the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
Ther are two modes for PoE mode. (SGSW-24040HP only)
802.3af: enable IEEE 802.3af PoE function. Per port maximum value must less
than 15.4 watts, total ports values must less than the Power Reservation value if
current PoE mode is 802.3af.
802.3at: disable IEEE 802.3at high power PoE function. Per port maximum value
must less than 30 watts, total ports values must less than the Power Reservation
value if current PoE mode is 802.3at.
The Priority represents the ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in the case where the remote devices requires uses more
power than power supply can deliver. In this case the port with the lowest priority
will be turn off starting from the port with the lowest port number.
The Maximum Power value contains a numerical value that indicates the
maximum power in watts that can be delived to a remote device.
Per port maximum value must less than 15.4 watts, total ports values must less
than the Power Reservation value if current PoE mode is 802.3af.
Per port maximum value must less than 30 watts, total ports values must less
than the Power Reservation value if current PoE mode is 802.3at.
Once power overload detected, the port will auto shut down and keep on
detection mode until PD's power consumption lower than the power limit value.
The SGSW-24040HP did not have this parameter.
It can limit the port PoE supply watts. Per port maximum value must less than
15.4 watts, total ports values must less than the Power Reservation value if
current PoE mode is 802.3af. Per port maximum value must less than 30 watts,
total ports values must less than the Power Reservation value if current PoE
mode is 802.3at. Once power overload detected, the port will auto shut down
and keep on detection mode until PD's power consumption lower than the
297
User's Manual of SGSW-24040 / 24240 Series