Planet SGSW-24040 User Manual page 335


Identify the MASTER SWITCH
 Assign / re-assing Switch ID for each management purpose
Step 1: linking the switches by CB-STX50 stack cable.
Step 2: Check the Master LED of each SGSW switch to find out the Master Switch that is elected automatically by the stack
operation.
Step 3: Use the Web browser such as IE 7.0 to login the Master Switch, the default IP address is 192.168.0.100. Or you can use
the PLANET Smart Discovery Utility to find out the IP address of the stack group.
Figure 4-17-11 Use PLANET Smart Discovery Utility to display the IP address of stack master
Step 4: Choose "Stack \ Stack Configuration" from menu tree. You can see the Stack had established automaticatlly. As the
below screen appears:
The Switch ID is automatically assigned to the switches
1.
All switches with same Priority value "3".
2.
The one can't be delete is the Stack master.
3.
Step 5: We wish to make the SGSW switch w
the Switch ID to 1.
User's Manual of SGSW-24040 / 24240 Series
Figure 4-17-12 Stack Configuration
ith MAC "00-30-4f-76-27-10" / Switch I
314
D=2 to become the Stack Master and swap