Led Indications - Planet SGSW-24040 User Manual

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot when
needed. Figure 2-5 & Figure 2-7
SGSW-24040 / SGSW-24040R LED indication
■ System
LED Color
PWR Green
Master Green
STX1 Green
STX2 Green
■ 10/100/1000Base-T interfaces
LED Color
1000
Green
LNK/ACT
10/100
Orange
LNK/ACT
shows the LED indications of these Managed Switches.
Figure 2-5 SGSW-24040 / SGSW-24040R LED panel
Lights to indicate that the Switch is powered on.
Blink to indicate the System is running under booting procedure.
Lights to indicate that the Switch is the Master of the stack group.
Lights to indicate the stacking link through that port is successfully established.
Lights to indicate the stacking link through that port is successfully established.
Lights: To indicate the link through that port is successfully established with speed
1000Mbps
Blink: To indicate that the switch is actively sending or receiving data over that port.
If L10/100 NK/ACT LED light-> indicate that the port is operating at 10Mbps or
Off:
100Mbps
If LNK/ACT LED Off -> indicate that the port is link down
Lights: To indicate the link through that port is successfully established with speed
10Mbps or 100Mbps
Blink: To indicate that the switch is actively sending or receiving data over that port.
If 1000 LNK/ACT LED light-> indicate that the port is operating at 1000Mbps
Off:
If 1000 LNK/ACT LED Off -> indicate that the port is link down
User's Manual of SGSW-24040 / 24240 Series
Function
Function
16