Commands Particular To Camera - Canon DC10 E Service Manual

4-2 Commands Particular to Camera

<Outline>
(1) The commands particular to camera are provided for checking the operation.
(2) Make preparation according to the table below and carry out the desired commands particular to camera.
(3) To restore any setting back to the original status, press the PAUSE key (STORE) for each item again in the "ST" mode.
Turning the power OFF/ON resets all the settings.
ST EP PROCEDURE
CAM SPECIAL COMMAND
WB SET 1) Make setting shown at right.
2) Perform storing.
(Press the PAUSE button.)
WB 1) Make setting shown at right.
LOCK 2) Perform storing.
(Press the PAUSE button.)
WB 1) Make setting shown at right.
T URBO 2) Perform storing.
(Press the PAUSE button.)
WB 1) Make setting shown at right.
OUT DOOR 2) Perform storing.
(Press the PAUSE button.)
WB 1) Make setting shown at right.
INDOOR 2) Perform storing.
(Press the PAUSE button.)
IRIS 1) Make setting shown at right.
OPEN 2) Perform storing.
(Press the PAUSE button.)
IRIS 1) Make setting shown at right.
CLOSE 2) Perform storing.
(Press the PAUSE button.)
AGC 1) Make setting shown at right.
MAX 2) Perform storing.
(Press the PAUSE button.)
AGC 1) Make setting shown at right.
MIN 2) Perform storing.
(Press the PAUSE button.)
COLOR 1) Make setting shown at right.
BAR 2) Perform storing.
(Press the PAUSE button.)
White 1) Make setting shown at right.
100% 2) Perform storing.
(Press the PAUSE button.)
White 1) Make setting shown at right.
50% 2) Perform storing.
(Press the PAUSE button.)
BLACK & 1) Make setting shown at right.
WHIT E 2) Perform storing.
(Press the PAUSE button.)
GRAY 1) Make setting shown at right.
SCALE 2) Perform storing.
(Press the PAUSE button.)
WHIT E 1) Make setting shown at right.
LED ON 2) Perform storing.
(Press the PAUSE button.)
MONIT OR
CS Function ADDR MODE
2 08 3300 ST
RD
• ª • ª •
2 08 3301 ST
RD
• ª • ª •
2 08 3302 ST
RD
• ª • ª •
2 08 3303 ST
RD
• ª • ª •
2 08 3304 ST
RD
• ª • ª •
2 08 3305 ST
RD
• ª • ª •
2 08 3306 ST
RD
• ª • ª •
2 08 3309 ST
RD
• ª • ª •
2 08 330A ST
RD
• ª • ª •
2 08 330B ST
RD
• ª • ª •
2 08 330C ST
RD
• ª • ª •
2 08 330D ST
RD
• ª • ª •
2 08 330F ST
RD
• ª • ª •
2 08 3310 ST
RD
• ª • ª •
2 08 331F ST
RD
• ª • ª •
8
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT
Microcomputer operation
DT
--
-- WB is set.
ª
--
-- WB is locked.
ª
--
-- WB high-speed setting mode
ª
--
-- WB outdoor mode
ª
--
-- WB indoor mode
ª
--
-- T he iris is opened forcibly.
ª
--
-- T he iris is closed forcibly.
ª
--
-- A value of AGC gain is maximized.
ª
--
-- A value of AGC gain is minimized.
ª
--
-- Outputs color bar from DIGIC DV.
ª
--
-- Outputs white 100% from DIGIC DV.
ª
--
-- Outputs white 50% from DIGIC DV.
ª
-- Outputs white & black chart
-- from DIGIC DV.
ª
--
-- Outputs gray scale from DIGIC DV.
ª
-- Force the white LED to light.
--
ª