Separation Of R Upper Cover - Canon DC10 E Service Manual

1-2 Separation of R Upper Cover

(1) Connect to the External Power Source, and open the Disc Cover.
Note1 : Never touch the Lens Section of TS Mech Recorder Ass'y.
(2) Insert a clip or the like into the part B from the inside of the camera, disengage two claws C, and then detach the Center Cover Lid.
Note2 : If the Disc Cover does not open because the fuse is blown or power is not supplied, break the Center Cover Lid
to detach the R Upper Cover. When detaching it, be careful not to damage the surrounding covers.
(3) Remove two screws (s × 2). Remove five claws D, and detach the R Upper Cover.
Note3 : When detaching the R Upper Cover, take care not to deform the claws part.
(3) - s
Claws D
Disc Cover
(1)
R Upper Cover
(3) - s
Claws D
(3)
Center Cover Lid
Fig. 1
4
(2)
(1)
External Open Knob
Power
Jack Cover
Source
Note 1
(2) Claws C
Lens part
DC10 E, DC20 E
DISASSEMBLING
B
Clip
Slide
Open the
Disc Cover
s
2.5mm
Metal
M1.7