Cvf Adjustment; Forced Cvf On, Adjustment Image (B/W) Setting; Cvf Frequency Adjustment - Canon DC10 E Service Manual

5-8 CVF Adjustment

For this camcorder, CVF adjustment is optional. However, if malfunction is found in CVF image, picture quality or color after replace-
ment of a CVF-related part, be sure to carry out the following adjustment.
Note)
(1) The adjustments from 5-8-3 through 5-8-5 must be carried out in sequence.
Remember that Satisfactory performance will not be attained unless all adjustments are performed.
Preparation)
(1) Carry out CVF adjustment in the camera mode in the product condition.

5-8-1 Forced CVF ON, Adjustment Image (B/W) Setting

Procedure)
(1) Referring to the table shown below, make the setting.
ST EP
Forced CVF ON 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
Black and white image 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)

5-8-2 CVF Frequency Adjustment

M. EQ. Frequency counter
TP. Extension connector - pin 4 (EVF HD)
SPEC. 15.734 ± 0.1kHz
Procedure)
(1) Carry out adjustment according to the table shown below.
Note) When the following adjustment is in progress (MD: ST), the LCD and CVF images are not synchronized, but it
is not malfunction.
ST EP
CVF Frequency 1) Make the setting shown at right.
Adjustment 2) Perform storing.
(press the PAUSE button.)
PROCEDURE
CS
0
2
PROCEDURE
CS
0
MONIT OR
Function MD ADDR DT
00 ST 0004 02
RD
08 ST 330F --
RD
MONIT OR
Function MD ADDR DT
21 ST 0003 "ADJ" Start of setting
RD ADJ Completion of setting
38
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT
Adjustment points and range
Start of setting
Completion of setting
Completion of setting
Adjustment points and range