Separation Of Cvf Unit, Sub Pcb - Canon DC10 E Service Manual

1-7 Separation of CVF Unit, SUB PCB

(1) Remove one screw (a × 1), disconnect the CN1501, and demount the CVF Unit.
(2) Remove one screw (a × 1), disconnect the CN2901 and the CN2905 (B to B), and detach the SUB PCB.
(3) Detach the SUB PCB Form.
<Note on Reassembling>
(1) Attach the SUB PCB Form to the position indicated in the figure below.
CVF Unit
(1) - a
(2) - a
a
2.5mm
Metal
M1.7
(1)
CN1501
(1)
(3)
SUB PCB
CN2905
(B to B)
SUB PCB Form
CN2901 (B to B)
(2)
Note on Reassembling (1)
Attachment
reference
SUB PCB Form
Attachment
reference
Fig. 11
14
DC10 E, DC20 E
DISASSEMBLING