Canon DC10 E Service Manual page 24

5-12 Built-in microphone
5-12-1 Wind screen function
5-13 Built-in Flash Shooting (DC20 E only)
5-13-1 Flash modes
5-13-2 Shutter speed
5-13-3 Shooting distance
5-14 Auxiliary light source (DC20 E only)
5-14-1 Flash mode
5-15 Other additional functions
5-15-1 Disc counter
5-15-2 Data code
a. Time and date
b. Camera data
5-15-3 Accessory shoe
5-15-4 REC Search function
5-15-5 REC Review function
5-15-6 Remote control reception ON/OFF Possible. This can be done in Camera mode and PLAY mode (by selecting from menu).
5-15-7 Headphone volume adjustment
5-15-8 Widescreen TV (16:9)
5-15-9 AEB shooting
5-15-10 Still image check time setting
5-15-11 Microphone attenuation
5-15-12 Microphone level meter
5-15-13 Image effect settings
Vivid
Neutral
Low Sharpening
Soft Skin Detail
Custom
Stereo (using electret condenser microphone)
Omni-directional microphone × 2 + Electric circuitry for stereo
Included. With ON/OFF switch (Menu selection. Available for built-in microphone only)
Pre-flash light adjustment system
Auto flash, auto flash with red-eye reduction, manual flash, flash off
Flash On : Flash at 1/1000 sec or less in Movie mode and at 1/500 sec or less in Still Image mode.
Wide end, approx. 80 cm to 2.5 m, Tele end, approx. 1 m to 1.3 m
The allowable shooting range is indicated as approx. 1 to 2 m in the Instruction Manual.
Includes mini video light (equipped with high-brightness white LED) with light button.
Enables shooting at distances of approx. 1.5 m in AUTO mode.
The AF auxiliary light is set to Auto when AF Auxiliary Auto is selected and when red-eye
reduction function is selected. The AF auxiliary light is OFF in Fireworks mode.
The total cumulative time for a recoding scene is indicated by hours: minutes: seconds.
The date and camera information during recording are automatically recorded and can be dis-
played during playback.
Automatic calendar range: January 1, 2005 through December 31, 2030 (the initial setting is
January 1, 2005)
The recording start (year/month/day) display can be selected from the three options below:
Supports world clock (Selecting the city name of your destination automatically adjusts to the
date and time of the destination. Supports daylight saving time), and records the recording start
time (hour/minute/second).
Shutter speed and aperture value information are recorded (but not displayed during recording),
and can be displayed during playback. During playback, time can be displayed in five different
modes (date only, time only, date and time, or date and time and camera data).
Not supported
None
Supported. Accessed by operating the Recording Check button when camera recording is paused. Plays
back the movie from the beginning of the recorded scene and then returns to the state before playback
started. There is no sound.
Not available (Headphone terminal not included)
When Widescreen TV mode is selected (button setting), the LCD panel screen changes to letterbox
display (top and bottom of the screen are masked with black bands). Setting is possible in
AUTO mode. Widescreen TV cannot be set under VIDEOmode and LP mode
Recording is done in Card/Camera mode with exposure correction automatically changed to ±0
level, -0.5 level, and +0.5 level. (Continuous shooting mode: when AEB
shooting is not possible.
After releasing the Photo button, the display time can be set for checking the still images.
One of 6 settings; OFF (0 sec), 2, 4, 6, 8, or 10 seconds can be selected as the setting mode.
No function
No function
The available image effect settings in the FUNC. menu are Vivid, Neutral, Low Sharpening, Soft
Skin Detail, and Custom. These settings cannot be made in Special Scene mode.
Emphasizes contrast and color depth, and presents images with vibrant and striking colors.
Limits the contrast and color depth, and presents pure images without any enhancements.
Provides image with less distinct outlines and a softer touch.
Smoothes the outlines of skin sections, and presents skin sections with a softer tone.
Enables adjustment of the brightness, contrast, sharpness, and color depth.
22
DC10 E, DC20 E
GENERAL DESCRIPTION OF PRODUCT
is selected) Flash