Image Colors Are Not Right; Images Appear Dark - Epson EB-D6250 User Manual

Problem Solving

Image colors are not right

Check
Do the input signal settings match the signals from the connected
device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
g
Is the Contrast adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)

Images appear dark

Check
Is the image brightness set correctly?
g
Is the Contrast adjusted correctly?
Is it time to replace the lamp?
Change the following settings according to the signal for the connected equipment.
• When the image is from a device connected to the Computer1 or Computer2 port.
s Signal - Input Signal p.66
• When the image is from a device connected to the S-Video or Video port.
s Signal - Video Signal p.66
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.65
Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.20
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.65
Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.65
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.65
Adjust the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.65
s Settings - Power Consumption p.68
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.65
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.102
Remedy
Remedy
93