Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.

Are the remote control ID and the Projector ID matched?

Nothing appears on the external monitor

Check

Are images input from a port other than the Computer1 port?

Press the [A/V Mute] button on the remote control to cancel A/V Mute.

s "Hiding the Image and Sound Temporarily (A/V Mute)"

When using a commercially available audio cable, make sure it is labeled "No resistance".

If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.

Point the remote control towards the remote receiver.

s "Remote control operating range"

The operating range for the remote control is about 6 m.

s "Remote control operating range"

Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to

Off from Remote Receiver in the Configuration menu.

s Settings - Remote Receiver

p.68

Check the Remote Receiver from the Configuration menu.

s Settings - Remote Receiver

p.68

s "Replacing the remote control batteries"

Make sure the ID for the projector you want to operate and the ID for the remote control match. To operate all projectors

by remote control regardless of the ID setting, set the remote control ID to "0".

s "Setting the remote control ID"

p.53

The only images that can be displayed on an external monitor are analog RGB signals from the Computer1 port.

Remedy

p.47

Remedy

p.16

p.15

Remedy

Table of Contents

This manual is also suitable for:

Eb-d6155w Eb-d6150

The Remote Control Does Not Work; Nothing Appears On The External Monitor - Epson EB-D6250 User Manual