Replacing The Remote Control Batteries - Epson EB-D6250 User Manual

Part Names and Functions
Name
W
[USB] button Changes to the following image.
Images from the device connected to the USB (TypeA)
port
X
Changes to the images projected with EasyMP Network
[LAN] button
Projection. When projecting using the optional Quick
Wireless Connection USB Key, this button switches to
that image.
Y
Switches to the image from the input port where video
[Source Search]
signals are being input.
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
Z
Outputs remote control signals.
Remote control light-
emitting area
Function
p.31

Replacing the remote control batteries

If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size manganese or alkaline batteries ready. You
cannot use other batteries except for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
Safety Instructions
s
a
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
b
Replace the old batteries with new batteries.
15