Projecting Images
Switching to the Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the remote control.
A
Each time the button is pressed, it cycles through the following images:
• Computer1 port
• Computer2 port
B
Each time the button is pressed, it cycles through the following images:
• S-Video port
• Video port
• HDMI port
C
Changes to the following image.
• Images from the device connected to the USB (TypeA) port
D
Changes to the images projected with EasyMP Network Projection. When
projecting using the optional Quick Wireless Connection USB Key, this
button switches to that image.
Remote control
32