Table of Contents
Advertisement
Adjusting Projected Images
Adjusting the Volume
You can adjust the volume using one of the following methods.
• Press the [Volume] buttons on the remote control to adjust the volume.
Remote control
• Adjust the volume from the Configuration menu.
Settings - Volume
p.68
s
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
[a] Decreases the volume.
[b] Increases the volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Dynamic
Ideal for use in a bright room. This is the brightest
mode, and reproduces shadow tones well.
Ideal for making presentations using color materials
Presentation
in a bright room.
Ideal for watching films in a dark room. Gives
Theatre
images a natural tone.
Photo
*1
Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
*2
Ideal for watching TV programmes in a bright
Sports
room. The images are vivid and brought to life.
sRGB
Ideal for images that conform to the sRGB
standard.
Even if you are projecting onto a blackboard
Blackboard
(greenboard), this setting gives your images a
natural tint, just like when projecting onto a screen.
Whiteboard
Ideal for making presentations using a whiteboard.
Select Customized if you want to adjust the R, G,
Customized
B, C, M, and Y settings in the Color Adjustment
submenu of the Configuration menu.
*1 This selection is only available when the input signal is RGB or when the
source is USB or LAN.
*2 This can be selected when inputting component video signals, S-video signals,
or composite video signals.
37
Application
g
color
Advertisement
Table of Contents
