Table of Contents
Advertisement
List of Functions
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)"
p.31
Sub-menu
You can display the cumulative lamp operating time
Lamp Hours
When it reaches the lamp warning time, the characters are
displayed in yellow.
You can display the source name for the connected
Source
equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the
Signal menu according to the Source.
You can display the resolution.
Resolution
You can display the settings for Video Signal in the Signal
Video Signal
menu.
Function
*
.
Sub-menu
Refresh Rate
You can display the Refresh Rate
You can display the image signal information.
Sync Info
This information may be needed if service is required.
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
Event ID
Displays the application error log.
s "About Event ID"
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
80
Function
g
.
p.97
Advertisement
Table of Contents
