Adjusting Projected Images
horizontal and vertical correction using the [
[
] buttons on the control panel.
Settings - Keystone - H/V-Keystone
s
a
If the [Esc] button is held down for about two seconds while
correcting with Quick Corner, the following screen is displayed.
Reset Quick Corner: Resets the result of Quick Corner
corrections.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
s "Settings Menu"
Adjusting the Image Size
Turn the zoom ring to adjust the size of the projected image.
The zoom ring is under the sliding cover.
], [
], [
p.68
p.68
], and
Adjusting the Image Position
Press the foot lever to extend and retract the front foot. You can adjust the
position of the image by tilting the projector up to 10 degrees.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
Correcting the Focus
You can correct the focus using the focus ring.
The focus ring is under the sliding cover.
36