Table of Contents
Advertisement
List of Functions
Wireless LAN menu
Submenu
Wireless LAN
Turn On when connecting the projector to the computer over
Power
wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to
prevent unauthorized access by others.
This is set to On by default.
Select Quick when connecting a computer directly to the
Connection
projector.
Mode
Select Advanced when connecting a computer to the projector
via an access point.
Set to Advanced when connecting to multiple computers or
when controlling the projector via a network.
This is set to Quick by default.
s "Monitoring and Controlling"
Function
p.114
Submenu
Channel
(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
Set the wireless LAN system to either 802.11b/g or
Wireless LAN
802.11b/g/n.
Sys.
The default value is 802.11b/g/n.
SSID Auto Set-
Set to On to reduce the projector search time when connecting to
ting
a network using Quick from Connection Mode.
Set to Off when connecting to multiple projectors at the same
time.
This is set to On by default.
g
Enter an SSID
. When an SSID is provided for the wireless LAN
SSID
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
You can make network settings.
IP Settings
DHCP: Set to On to make network settings using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can input the IP Address
projector. You can input a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the Subnet Mask
projector. You can input a number from 0 to 255 in each field of
the address. However, the following subnet masks cannot be
used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can input a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
74
Function
g
. If this
g
assigned to the
g
for the
g
Advertisement
Table of Contents
