Image Colors Are Not Right - Epson EB-L20002U User Manual

Problem Solving
Check
Is the correct resolution selected?
(Only when projecting computer images)
Is the image direction correct?

Image colors are not right

Check
Do the input signal settings match the signals from the connected
device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
Is the Contrast adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
Is the brightness of the room appropriate?
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.243
s Computer's documentation
Make the correct settings in Projection from the Configuration menu.
s "Installation Settings" p.34
Change the setting according to the signal for the connected equipment.
s Signal - Advanced - Input Signal
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.136
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.48
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.136
Adjust the Gamma or RGBCMY setting from the Configuration menu.
s Image - Advanced p.136
s "Adjusting the Image" p.78
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.136
If the room is darker than when the auto adjustment was performed, the tint of the projected images may not be displayed
correctly. Make the room darker and then perform auto adjustment again.
s "Screen Matching" p.93
s "Color Calibration" p.208
Remedy
Remedy
p.137
192