System Settings - Kodak 2400 DV Plus User Manual

System settings

System Setting
Auto Reset
Auto power save ON/OFF
Printer Heater OFF
(PR mode only)
Auto Projection Lamp OFF
Fine mode contrast select
Auto Skew Correction
Retain
A-61316 April 2010
3. In each setting mode, press the Multi-Print key to enter the setting
value. Each press of the Multi-Press key increases the setting
value. When the value exceeds the maximum setting of the selected
mode, it returns to 00 or 01 (month, day).
4. When the settings of all modes are complete, press the Start key to
valid the time of day setting.
U8: Total Scan Counter — the number of scan sequences carried out
by the scanner can be displayed with this function.
1. Select U8 in the User mode.
2. Press the Start key. The current number of scan sequences by the
scanner is displayed.
Selection Initial
Setting
Enabled 200V *
Disabled 120V *
Enabled 200V *
Disabled 120V *
Disabled *
30 min.
60 min.
Disabled *
30 min.
60 min.
Contrast *
Emphasis
Outline Emphasis
Retained *
Not Retained
Description
Setting changes made to the control panel that are not
used within 60 seconds of being input are
automatically cancelled and the system reverts back to
the original settings.
Sets the unit to enable or disable the Auto Power Save
mode. For USA and Canada (120V area), the Auto
Power Save mode becomes available only if the
Energy Star Kit is mounted on the scanner.
Turns the printer's heater off if the system is left idle for
a specific period of time.
Priority is given to the Power Save mode if Power
Save has been set.
Turns the projection lamp off if the system is left idle for
a specified period of time.
Priority is given to the Power Save mode if Power
Save has been set.
Applies the following functions as required:
Contrast Emphasis: applied when film contains text
that is poorly contrasted against its background
making it difficult to read.
Outline Emphasis: applied when film contains blurred
black-and-white images.
Determines whether or not to retain the original
(uncorrected) skew of a screen image after the print
has been made.
B-7