Settings In Each User Mode Function - Kodak 2400 DV Plus User Manual

Settings in each User
mode function
B-4
U1: Special Print mode — this function is not available.
U2: Engineering Enhancement mode — slight image distortion
occurring in the scan direction can be corrected with this function.
Before correction
After correction
1. Select U2 in the User mode.
2. Press the Exposure Mode key to display d*.
3. Press the Exposure Adjustment key (Darker or Lighter) to select
the desired setting value.
4. Press the Start key to validate the setting.
NOTE: This setting returns to the default value when the power switch
is turned off. You can register this setting by using the Job
Program function.
Code
d0
d1
d2
d3
d4
d5
d6
d7
d8
U3: Auto Power Save — time it takes the unit to be automatically set
into the Power Save mode.
1. Select U3 in the User mode.
2. Press the Exposure Mode key to display d*.
3. Press the Exposure Adjustment key (Darker or Lighter) to select
the desired setting value.
4. Press the Start key to validate the setting.
Code
d1
d2
d3
NOTE: For USA and Canada only. The Auto Power Save function is
only available if the Energy Star Kit is mounted on the scanner.
Setting Value
0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mm
Setting Value
Auto Power Save (15 min.)
Auto Power Save (30 min.)
Auto Power Save (60 min.)
Initial Setting
*
Initial Setting
*
A-61316 April 2010