Control Panel And Functions; Control Panel - Basic - Kodak 2400 DV Plus User Manual

2 Control Panel and Functions

Control Panel - Basic

Output
Selection
Tray
Cassette1
Cassette2
User Mode
Auto Skew Correction
Centering/Fit
Auto
Masking
Manual
Text
Print Mode
Fine
Photo
Resolution
Auto
Film Type
Nega
Posi
Job Recall
Darker
9
Zoom +
Auto
Zoom clr
Lighter
Zoom -
11
C
15
PC/PR
Shift
Start
A-61316 April 2010
Following are descriptions of the Control Panel functions. Some
functions are available by using the Shift key and some functions
provide access to optional accessories. This chapter provides an
overview of each function and a description of image processing
features. Chapter 3, Using the Scanner, provides procedures on how to
use each function.
1 Output Selection — select the paper feeding source according to
the format of the film image that is displayed on the screen. This
key is only available in PR mode.
:
1
2
3
4
5
6
7
8
7
Tray:
10
12
Cassette1:Prints the film image on paper fed from cassette 1.
13
14
2 Auto Skew Correction — turns auto skew on or off. When
auto skew is on, the indicator is lit and any skew of the image will
16
be corrected during printing.
After printing, the skew is retained or reset. Contact your Kodak
Representative to change the default.
when this lamp is lit: a 90 degree image rotation is
performed during printing. The image on the screen will
be rotated 90 degrees. The screen image will be
oriented horizontally on paper that is positioned
lengthwise, and vertically on paper that is positioned
crosswise.
when this lamp is blinking: the Auto Film Format
Select Print function is available when Letter (or A4)
size paper is placed in both lengthwise and crosswise
positions in the paper feeding tray/cassette. Paper that
best suits the format of the image on the screen will be
used for printing.
If you want to use this function, contact your Kodak
Representative.
Prints the film image on paper fed from the print tray.
2-1