Printer Maintenance; Cleaning The Paper Pickup Rollers - Kodak 2400 DV Plus User Manual

Printer maintenance

Cleaning the paper
pickup rollers
4-16
Clean the printer at regular intervals.
NOTES:
• Use a soft cloth and NEVER use abrasives or corrosive detergents; a
damp cloth and a mild home detergent can be used for heavier
cleaning.
• Never spray cleaning solution directly on the printer's surface; the
spray could penetrate the air vents and damage the printer.
• Do not spill water or detergent into the printer.
• Never touch the copper or brass electrodes or electrical parts that are
located inside the top cover and underneath the toner cartridge, as a
printer malfunction can result.
• Do not touch around the image transfer roller (may result in reduced
print quality) or around the fusing unit (may result in burns).
1. Turn off the printer and open the top cover.
NOTES:
• Never touch the copper or brass electrodes or electrical parts
that are located inside the top cover and underneath the toner
cartridge, as a printer malfunction can result.
• Be careful not to touch around the image transfer roller (touching
certain parts in this area may result in reduced print quality) or
around the fusing unit (since the inside reaches temperatures of
about 392 °F (200 °C), touching any part in this area may result in
burns).
2. Remove the toner cartridge and store it in a light-protected bag.
A-61316 April 2010