Changeable Splash Screen; Boot Functions; Boot Device Order - HP dx7300 Technical Reference Manual

8.2.2 Changeable Splash Screen

✎
A corrupted splash screen may be restored by reflashing the BIOS image through F10 setup,
running HPQFlash, or running FLASHBIN.EXE. Depending on the system, changing
(customizing) the splash screen may only be available with asistance from HP.
The splash screen (image displayed during POST) is stored in the BIOS ROM and may be
replaced with another image of choice by using the Image Flash utility (Flashi.exe). The Image
Flash utility allows the user to browse directories for image searching and pre-viewing.
Background and foreground colors can be chosen from the selected image's palette.
The splash screen image requirements are as follows:
■
Format = Windows bitmap with 4-bit RLE encoding
■
Size = 424 (width) x 320 (height) pixels
■
Colors = 16 (4 bits per pixel)
■
File Size = < 64 KB
The Image Flash utility can be invoked at a command line for quickly flashing a known image as
follows:
>\Flashi.exe [Image_Filename] [Background_Color] [Foreground_Color]
The utility checks to insure that the specified image meets the splash screen requirements listed
above or it will not be loaded into the ROM.

8.3 Boot Functions

The BIOS supports various functions related to the boot process, including those that occur
during the Power On Self-Test (POST) routine.

8.3.1 Boot Device Order

The default boot device order is as follows:
1. CD-ROM drive (EL Torito CD images)
2. Diskette drive (A:)
3. USB device
4. Hard drive (C:)
5. Network interface controller (NIC)
✎
The above order assumes all devices are present in the initial configuration. If, for example, a diskette drive is
not initially installed but added later, then drive A would be added to the end of the order (after the NIC)
The order can be changed in the ROM-based Setup utility (accessed by pressing F10 when so
prompted during POST). The options are displayed only if the device is attached, except for USB
devices. The USB option is displayed even if no USB storage devices are present. The hot IPL
option is available through the F9 utility, which allows the user to select a hot IPL boot device.
Technical Reference Guide www.hp.com
BIOS ROM
8-3