HP dx7300 Technical Reference Manual page 27

Small Form Factor / Slim Tower Chassis
The chassis layouts for the Small Form Factor (SFF) used for the HP Compaq dc7700 models
and the Slim Tower (ST) used for the HP Comapq dx7300 models are shown in Figure 2-8.
Features include:
■
Tilting drive cage assembly for easy access to processor and memory sockets
■
Two configurations available:
❏
Without card cage:
◆
Two half-height, full length PCI 2.3 slots
◆
One PCI Express x16 graphics/SDVO reverse-layout slot
◆
One PCI Express x1 slot
❏
With card cage:
◆
Two full-height, full-length PCI 2.3 slots
Item
1
2
3
4
5
NOTE:
[1] Accepts PCI-E graphics or reversed-layout ADD2 card.
Figure 2-7. SFF / ST Chassis Layout, Top / Right Side Views
Technical Reference Guide
3 5
1 2 4
-
9
8
Chassis without card cage
Description
Power supply assembly
DIMM sockets (4)
PCI Express x1 slot
PCI Express x16
graphics/reverse-layout slot [1]
PCI 2.3 slots (2)
1
-
7
Chassis with card cage
Item Description
6 Card cage
7 Processor socket
8 Chassis fan
9 Optical drive bay
10 Diskette drive bay (under item 9)
www.hp.com
System Overview
6
2
9
8 7
2-11