HP dx7300 Technical Reference Manual page 141

Heading Option
File Ignore Changes
(continued) and Exit
Save Changes and
Exit
Storage Device
Configuration
✎
Support for specific Computer Setup options may vary depending on the hardware configuration.
Technical Reference Guide
Table 8-2
Setup Utility
Exits Computer Setup without applying or saving any changes.
Saves changes to system configuration or default settings and exits
Computer Setup.
Lists all installed BIOS-controlled storage devices.
When a device is selected, detailed information and options are
displayed. The following options may be presented.
Diskette Type
Identifies the highest capacity media type accepted by the diskette
drive.
Legacy Diskette Drives
Options are 3.5" 1.44 MB and
5.25" 1.2 MB.
Drive Emulation
Allows you to select a drive emulation type for a certain storage
device. (For example, a Zip drive can be made bootable by
selecting diskette emulation.)
Drive Type Emulation Options
ATAPI Zip drive None (treated as Other)
Diskette (treated as diskette drive)
ATA Hard disk None (treated as Other)
Disk (treated as hard drive)
Legacy diskette No emulation options available
CD-ROM drive No emulation options available
ATAPI LS- 1 20 None (treated as Other).
Diskette (treated as diskette drive).
Default Values IDE/SATA
Multisector Transfers (ATA disks only)
Specifies how many sectors are transferred per multi-sector PIO
operation. Options (subject to device capabilities) are Disabled, 8,
and 16.
CAUTION: Ordinarily, the translation mode selected
ï
automatically by the BIOS should not be changed. If the selected
translation mode is not compatible with the translation mode that
was active when the disk was partitioned and formatted, the data
on the disk will be inaccessible.
www.hp.com
Description
BIOS ROM
8-7