HP dx7300 Technical Reference Manual page 157

A.4 System Error Messages (1xx-xx)
Message Probable Cause
101 Option ROM error
102 System board failure
103 System board failure
104-01 Master int. cntlr. test fialed
104-02 Slave int. cntlr. test failed
104-03 Int. cntlr. SW RTC inoperative
105-01 Port 61 bit <6> not at zero
105-02 Port 61 bit <5> not at zero
105-03 Port 61 bit <3> not at zero
105-04 Port 61 bit <1> not at zero
105-05 Port 61 bit <0> not at zero
105-06 Port 61 bit <5> not at one
105-07 Port 61 bit <3> not at one
105-08 Port 61 bit <1> not at one
105-09 Port 61 bit <0> not at one
105- 1 0 Port 61 I/O test failed
105- 1 1 Port 61 bit <7> not at zero
105- 1 2 Port 61 bit <2> not at zero
105- 1 3 No int. generated by failsafe timer
105- 1 4 NMI not triggered by failsafe timer
106-01 Keyboard controller test failed
107-01 CMOS RAM test failed
108-02 CMOS interrupt test failed
108-03 CMOS not properly initialized (int.test)
109-01 CMOS clock load data test failed
NOTES:
[1] 102 message code may be caused by one of a variety of processor-related problems that may be solved by replacing the
processor, although system board replacement may be needed.
Technical Reference Guide
Table A-3.
System Error Messages
Message
109-02
[1] 109-03
1 10-01
1 10-02
1 10-03
1 1 1-01
1 12-01
1 12-02
1 12-03
1 12-04
1 12-05
1 12-06
1 12-07
1 12-08
1 12-09
1 12- 1 0
1 12- 1 1
1 12- 1 2
1 13-01
1 14-01
1 16-xx
162-xx
163-xx
164-xx
199-00
www.hp.com
Error Messages and Codes
Probable Cause
CMOS clock rollover test failed
CMOS not properly initialized (clk test)
Programmable timer load data test failed
Programmable timer dynamic test failed
Program timer 2 load data test failed
Refresh detect test failed
Speed test Slow mode out of range
Speed test Mixed mode out of range
Speed test Fast mode out of range
Speed test unable to enter Slow mode
Speed test unable to enter Mixed mode
Speed test unable to enter Fast mode
Speed test system error
Unable to enter Auto mode in speed test
Unable to enter High mode in speed test
Speed test High mode out of range
Speed test Auto mode out of range
Speed test variable speed mode inop.
Protected mode test failed
Speaker test failed
Way 0 read/write test failed
Sys. options failed (mismatch in drive type)
Time and date not set
Memory size
Installed devices test failed
A-5