HP dx7300 Technical Reference Manual page 165

A.13 Hard Drive Error Messages (17xx-xx)
Message Probable Cause
17xx-01 Exceeded max. soft error limit
17xx-02 Exceeded max. Hard error limit
17xx-03 Previously exceeded max. soft error
limit
17xx-04 Previously exceeded max.hard error
limit
17xx-05 Failed to reset controller
17xx-06 Fatal error while reading
17xx-07 Fatal error while writing
17xx-08 Failed compare of R/W buffers
17xx-09 Failed to format a track
17xx- 1 0 Failed diskette sector wrap during
read
17xx- 1 9 Cntlr. failed to deallocate bad sectors 17xx-62
17xx-40 Cylinder 0 error
17xx-41 Drive not ready
17xx-42 Failed to recalibrate drive
17xx-43 Failed to format a bad track
17xx-44 Failed controller diagnostics
17xx-45 Failed to get drive parameters from
ROM
17xx-46 Invalid drive parameters from ROM
17xx-47 Failed to park heads
17xx-48 Failed to move hard drive table to
RAM
17xx-49 Failed to read media in file write test
17xx-50 Failed I/O write test
Technical Reference Guide
Table A-12
Hard Drive Error Messages
Message
17xx-51
17xx-52
17xx-53
17xx-54
17xx-55
17xx-56
17xx-57
17xx-58
17xx-59
17xx-60
17xx-63
17xx-65
17xx-66
17xx-67
17xx-68
17xx-69
17xx-70
17xx-71
17xx-72
17xx-73
--
www.hp.com
Error Messages and Codes
Probable Cause
Failed I/O read test
Failed file I/O compare test
Failed drive/head register test
Failed digital input register test
Cylinder 1 error
Failed controller RAM diagnostics
Failed controller-to-drive diagnostics
Failed to write sector buffer
Failed to read sector buffer
Failed uncorrectable ECC error
Failed correctable ECC error
Failed soft error rate
Exceeded max. bad sectors per track
Failed to initialize drive parameter
Failed to write long
Failed to read long
Failed to read drive size
Failed translate mode
Failed non-translate mode
Bad track limit exceeded
Previously exceeded bad track limit
--
A-13