Powerware 9170 User Manual page 69

17.
18.
19.
+
Powerware 9170 UPS User's Guide
®
+
–
Figure 46. Battery Cable Installed in Battery Cabinet
–
Secure the , the , and the
+
compression lugs on the battery cabinet backplane as shown in
Figure 46. Torque all three compression lugs to 75–85 in lb
(8.5–9.6 Nm).
If an additional battery cabinet will be connected to the first, in
a daisy-chain configuration, use another external battery cabinet
cable assembly for the connections between the battery
cabinets (see Figure 47).
Locate the daisy-chained cable on the rear of the first battery
cabinet in the section below the location of the first cable
assembly. Follow this procedure for connecting any additional
daisy-chained battery cabinets.
Rev B www.powerware.com
S
Battery Cabinet Installation
conductors to the proper
61