Ups With Bypass Electrical Installation - Powerware 9170 User Manual

Chapter 3

UPS with Bypass Electrical Installation

NOTE
Installation" on page 57 for installing optional battery cabinets or to
"UPS Startup" on page 63.
Only qualified service personnel (such as a licensed electrician) should perform
the electrical installation. Risk of electrical shock.
The Powerware 9170
conduit to either a main power source circuit breaker or to an optional
external bypass switch. For hardwired installations, it is recommended
that you install a Powerware bypass switch to enable power transfer
during maintenance or UPS downtime. If a bypass switch is used, both
UPS input and UPS output must be hardwired– through separate
conduits
+
Powerware 9170 UPS User's Guide
®
If you have a plug-receptacle unit, continue to "Battery Cabinet
W A R N I N G
+
UPS input power may be hardwired through
–to the bypass switch, as shown in Figure 13.
Rev B www.powerware.com
S
19