A2-Gb20 - Paradyne 3162 User Manual

Configuration Options
C-40
General Options
Generate Yellow Alarm Signals
Initial Self Test
Primary Clock Source
External Clock Rate (KHz)
Test Timeout
Test Duration
User Interface: Communication Port
Options
Port Use
Port Type
Clock Source
Data Rate
Character Length
Parity
Stop Bits
Ignore Control Leads
Password Required
Inactivity Timeout
Disconnect Time
User Interface: External Device Options Value (Default in Bold)
External Device Commands
Dial-In Access
Connect Prefix
Connect Indication String
Escape Sequence
Escape Sequence Delay (sec)
Disconnect String
August 2000
Value (Default in Bold)
Enable, Disable
Enable, Disable
Network, DTE, Internal, External, Port 1
2048, 1544, 8
Enable, Disable
1 –120 (Default = 10)
Value (Default in Bold)
Mgmt, ASCII, Terminal
Asynchronous, Synchronous
Internal, External
1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 38.4
7, 8
None, Even, Odd
1, 1.5, 2
Disable, DTR
Enable, Disable
Enable, Disable
1 –60 (Default = 5)
Disable, AT, Other
Enable, Disable
Text Field, Clear
Text Field, Clear
Text Field, Clear
None, 0.2, 0.4, 0.6, 0.8, 1.0
Text Field, Clear

3162-A2-GB20-40