Pin Assignments
Overview
T1 Network Interface
3162-A2-GB20-40
The DSU/CSU is shipped with a power module. Various other interconnecting
cables are available. For cable feature numbers, refer to Appendix G,
List. This appendix describes connector pin assignments and cables.
The T1 network interface connector is an RJ48C, 8-position, unkeyed modular
jack (Table D-1).
The T1 line interface cable is a 20-foot, 24 AWG solid, 2-twisted-pair cable that is
either RJ48C-to-RJ48C
Table D-1. T1 Network Interface Connector
Signal
Receive Ring
Receive Tip
Transmit Ring
Transmit Tip
August 2000
(Figure
D-1) or RJ48C-to-DA15P
Pin Number
1
2
4
5
D
Equipment
(Figure
D-2).
D-1