Paradyne 3162 User Manual page 196

Index
configuration options
procedure for changing, 3-12
tables
Alarm, C-24
Cross Connect, C-11
DTE Interface, C-4
General, C-15
Management and Communication, C-26
Network Interface, C-2
Port, C-6
User Interface, C-17
worksheets, C-33
connectors
10BaseT port, D-4
rear panel
cabling examples, 2-5
functional description, 1-4
physical description, 1-3
pin assignments, D-1– D-14
CPU failure message, 5-2
crossover cable, D-7
CSS (Controlled Slip Seconds) report, 5-7
Customer 1 configuration area, 3-12
Customer 2 configuration area, 3-12
D
data channel loopback (DCLB), 5-24, C-9
data port. See PORT (1–2) interface
data terminal loopback (DTLB), 5-25, C-9
database, SNMP, 1-2
Device Fail message, 5-3
dimensions, B-2
DS0 channel allocation. See channel allocation
DTE Drop/Insert interface
channel allocation procedure, 4-8
configuration options, C-4
failure message, 5-2
front panel LED indications, 3-3
functional description, 1-2, 1-4, 2-1
managed by SNMP, E-1
physical description, 1-3
pin assignments, D-3
technical specifications, B-1
troubleshooting, 5-15
DTE loopback (DLB), 5-22
configuration option, C-4
external control interface, D-3
IN-2
E
EER (Excessive Error Rate) condition
ASCII terminal/printer message, 5-12
Device Health and Status message, 5-3
front panel LED indication, 3-2, 3-3
Performance Report message, 5-7
troubleshooting, 5-16
EIA–530–A interface, D-8
Embedded Data Link (EDL)
configuration option, C-7
used with SNMP system, 1-2, 2-3, 2-4, F-1
enterprise-specific trap, 5-13
environmental specifications, B-2
equalization, line, C-4
error messages. See messages, alarm
ES (Errored Seconds) report, 5-6
Ethernet port, 1-2, 1-4
configuring, 4-3
connector, D-4
IP address, C-23
protocol, C-23
statistics, 5-8
status, 5-8
external modem interface, D-7
F
Facility Data Link (FDL)
configuration option, C-2
used with SNMP system, 1-2, 2-3, 2-4, F-2
Factory 1 configuration area, 3-12
Factory 2 configuration area, 3-12
failure analysis. See troubleshooting
failure message, troubleshooting, 5-16
features, 1-1– 1-4
fractional T1, 2-1, 2-2
framing configuration option, C-2, C-4
front panel
operation, 3-1
physical description, 1-3, 3-1
I
indicators. See LEDs, front panel
IP (Internet Protocol) addressing
configuration option, C-26, C-27
for 10BaseT port, C-23
example of use, F-1
procedure for configuring, 4-5
IP Routing Table, 5-10
August 2000 3162-A2-GB20-40