H Displaying Dsu/Csu Test Status - Paradyne 3162 User Manual

Displaying DSU/CSU Test Status
"
3162-A2-GB20-40
Use the System and Test Status screen to display the active tests for the
DSU/CSU. Table 5-12 lists these messages.
Procedure
To display test status:
1. From the Main Menu screen, select Status.
2. From the Status screen, select System and Test Status.
Table 5-12. Test Status Messages
Message
No Test Active
LLB Test Active
PLB Test Active
DLB Test Active
RLB Test Active
DCLB Test Active, Port n
DTLB Test Active, Port n
QRSS Test Active, Network
1–8 Test Active, Network
Mon QRSS Test Active,
Network
QRSS Test Active, Port n
511 Test Active, Port n
Mon QRSS Test Active,
Port n
Mon 511 Test Active, Port n
DLB Test, External Contact
Lamp Test Active
August 2000
Description
No tests are currently active.
The network interface is in Line loopback.
The network interface is in Payload loopback.
The DTE Drop/Insert (DSX-1) port is in DTE loopback.
The DTE Drop/Insert (DSX-1) port is in Repeater
loopback.
Port n is in a Data Channel loopback.
Port n is in a Data Terminal loopback.
A QRSS test pattern is being sent on the network
interface.
A 1-in-8 test pattern is being sent on the network
interface.
A QRSS test pattern is being monitored on the network
interface.
A QRSS test pattern is being sent to the network on the
channels allocated to port n.
A 511 test pattern is being sent to the network on the
channels allocated to port n.
A QRSS test pattern is being monitored on the channels
allocated to port n.
A 511 test pattern is being monitored on the channels
allocated to port n.
The DTE Drop/Insert (DSX-1) port is being held in DTE
loopback by the external contact.
The Lamp test is currently active.
Monitoring and Testing
5-29