Matrix Software
This section discusses the following topics:
(http://www.extron.com).
Matrix Switchers Control Program
Installing the Software
the instructions that appear on the screens. The Matrix software program occupies
Software
NOTES:
Matrix Switchers Control Program
Using the Button Label Generator
ties and sets of ties
the DXP front panel buttons
limited to the features and configuration of your DXP.
The DXP switcher can support either RS-232 or RS-422 serial communication
protocol from the rear panel Remote RS232/RS422 port, and RS-232 from
the front panel Config port. The DXP operates at 9600, 19200, 38400,
or 115200 baud rates. See
and Baud Rate (Rear
RS232/RS422 and Config ports using the front panel buttons.
C:\Program Files\Extron\Matrix
"Selecting the RS-232/RS-422 Protocol
Panel)" on page 42 to configure the Remote
70