Log, Twig, And Ember Installation - Travis Industries DVL EF Insert Owner's Manual

Table of Contents

Advertisement

Finalizing the Installation
If converting this unit to propane, do so now (see the instructions on page 32).
2
Install the log set, kibbles (optional), and embers (if using the decorative fireback, install it prior to the
log set - page 36).
On newer untis, an ember chunk is
included with the heater (instead of
cast into the burner). Place it in the
location shown (it should not cover
any burner holes).
Travis Industries
Place the rear log on the two
a
platforms at the rear of the
firebox.
Place the left and right logs.
b
The pins on the burner insert
into the holes on the logs.
Place the twig over the rear
c
log. The pins on the log insert
into the holes on the twig.
d
Place the embers over the front and
side edges of the burner (do not place
e
them over the burner holes). Place
them in a random pattern.
4 0 4 1 0 2 8
1 9
These pins
insert into the
holes in the
log.
1 0 0 - 0 1 1 5 1

Advertisement

Table of Contents
loading

Table of Contents