Travis Industries DVL EF Insert Owner's Manual page 18

1 8
Glass Frame Removal and Installation (continued)
The spring pin can come loose from the latch assembly. This occurs when it is turned 1/4 turn when it is
disengaged. Follow the directions below to re-install the spring pin if it becomes loose.
NOTE: The spring pins
can be installed with the
glass frame in place or
removed.
Travis Industries
Finalizing the Installation
To re-install the spring pin, first
insert this end into a 1/4" key.
Push in slightly and
twist 1/4 turn.
With this pin horizontal, the
spring pin will remain in place.
4 0 4 1 0 2 8
Insert the spring pin into
this bracket with the pins
aligned vertically.
1 0 0 - 0 1 1 5 1