Configuring Area Code Setup - Nortel 2002 User Manual

Configuring options
or

Configuring Area Code setup

Use the Area Code Setup
an incoming call arrives with an area code that matches one of the three
stored area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number). This reordering is also
performed when a user scrolls through their Callers List. To configure the
area code, press the
Telephone Options
To configure default area codes (maximum of three):
42
4. Choose one of the following:
— Press the
configuration.
— Press the
existing configurations.
menu to save up to three area codes. When
Services key and select
menu.
1. Press the
scroll and highlight
2. Press the
3. Press the
scroll and highlight one of the following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
Select soft key to save the
Cancel soft key to keep
Call Log Option
Up/Down navigation keys to
Area Code
Select soft key.
Up/Down navigation keys to
from the
Setup.